[kostek69]

sprawdzałem na drugim kompie i morał taki: pobieramy z brothera skrypt tak jak w linku wyżej, instalujemy wszystko i konfigurujemy, a brscan4 instalujemy z AUR i działać będzie.

Przydało się by zrobić skrypt z takimi rozwiązaniami to co się da z aur a to czego się nie da z „plików”. Dobre dla nowych zapracowanych mających mało czasu odbiorców…

Nie każdy chce się uczyć.

[kostek69]

kabla nie znalazłem…
Instalowałem ze skryptu który na stronie brothera jest, pobiera on .deb -y, wiadomo że wolałbym nie instalować .deb bo wpływa to na stabilność systemu, ale niestety niema dla mojej drukarki ze skanerem sterowników (chyba że nie znalazłem)

tak czy owak, postanowiłem przekonfigurować ustawienia i zainstalowałem od nowa sterowniki, z tą różnicą że zamiast IP wybrałem opcję z nazwą węzła i nagle zatrybiło… :D

Temat uważam za rozwiązany

[kostek69]

scanimage --check-devices
scanimage: no SANE devices found

cytat z linka który podałeś
„Check that /etc/sane.d/dll.conf contains brotherX, where the X stands for the brscan version from above. If nothing was found, add brotherX to the end of the file.”

Więc otwieram ten plik i jest w nim:
brother4 czyli jest ok…
więc…

sudo brsaneconfig4 -d 
[sudo] hasło użytkownika manjaro: 
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>                           <mount point>  <type>  <options>  <dump>  <pass>
UUID=7c904b35-4418-4247-adcf-57d6515810e0 /              ext4    defaults,noatime 0       1
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating system.
  # If using Linux, try "modprobe sg".

  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
-----------------------------
ls -R -all /proc/bus/usb
ls: nie ma dostępu do '/proc/bus/usb': Nie ma takiego pliku ani katalogu
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Nie ma takiego pliku ani katalogu
-----------------------------
scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-----------------------------
-----------------------------
/etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg:
-----------------------------
/etc/opt/brother/scanner/brscan4//Brsane4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_12.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_10.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_3.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_6.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_16.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_1.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_2.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_15.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_14.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_7.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_9.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_8.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_13.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_5.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_11.ini:
-----------------------------
-----------------------------
ping
test DCP-J152W
ping 192.168.001.005 -w 10

PING 192.168.001.005 (192.168.1.5) 56(84) bytes of data.
64 bytes from 192.168.1.5: icmp_seq=1 ttl=255 time=18.3 ms
64 bytes from 192.168.1.5: icmp_seq=2 ttl=255 time=16.7 ms
64 bytes from 192.168.1.5: icmp_seq=3 ttl=255 time=14.7 ms
64 bytes from 192.168.1.5: icmp_seq=4 ttl=255 time=12.8 ms
64 bytes from 192.168.1.5: icmp_seq=5 ttl=255 time=20.8 ms
64 bytes from 192.168.1.5: icmp_seq=6 ttl=255 time=8.84 ms
64 bytes from 192.168.1.5: icmp_seq=7 ttl=255 time=17.8 ms
64 bytes from 192.168.1.5: icmp_seq=8 ttl=255 time=15.7 ms
64 bytes from 192.168.1.5: icmp_seq=9 ttl=255 time=13.8 ms
64 bytes from 192.168.1.5: icmp_seq=10 ttl=255 time=21.8 ms

--- 192.168.001.005 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9016ms
rtt min/avg/max/mdev = 8.848/16.156/21.840/3.663 ms

no to otwieram ten plik /etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg

jest w nim:

DEVICE=DCP-J152W , "DCP-J152W" , 0x4f9:0x2df , IP-ADDRESS=192.168.001.005 

nie kumam…

[Autor]

Posty