[enszur]

Zainstalowałem sddm, zakomentowałem to. Odpalił się system na nowo tylko wyskakuje ekran logowania i ani myszka nie działa i klawiatura. Kursor miga w miejscu hasła i nic nie mogę zrobić.
I wyskakuje mi w biosie Pointer to TMDS table invalid

[enszur]

Jest odkomentowane, ponieważ w poradnikach przy instalacji deepinitp. było aby odkomentować więc to uczyniłem. Ale swoją drogą, nie mogę zainstalować repozytoriów z deepin w zakładce kategorie – przycisk zastosuj nie jest aktywny. Po ściągnięciu przez konsolę deepin i instalacji i reboocie nadal to samo wszystko. Nic się nie zmienia. Przy odpalaniu wyskakuje mi error w związku z nouvea.

[enszur]

System:    Host: piotr-pc Kernel: 4.14.48-2-MANJARO x86_64 bits: 64 compiler: gcc v: 8.1.1 
           Desktop: Gnome 3.28.2 dm: gdm,lightdm Distro: Manjaro Linux 17.1.10 Hakoila 

po wpisaniu journalctl -b1:

-- Logs begin at Mon 2018-01-22 08:33:20 GMT, end at Fri 2018-06-22 17:08:10 BST. --
Jan 22 08:33:20 piotr-pc kernel: microcode: microcode updated early to revision 0x23, date = 2017-11-20
Jan 22 08:33:20 piotr-pc kernel: Linux version 4.14.14-1-MANJARO (builduser@manjaro) (gcc version 7.2.1 20171224 (G>
Jan 22 08:33:20 piotr-pc kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=3f307f53-184f-457f-94>
Jan 22 08:33:20 piotr-pc kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Jan 22 08:33:20 piotr-pc kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Jan 22 08:33:20 piotr-pc kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Jan 22 08:33:20 piotr-pc kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Jan 22 08:33:20 piotr-pc kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' >
Jan 22 08:33:20 piotr-pc kernel: e820: BIOS-provided physical RAM map:
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x0000000000100000-0x000000006c45ffff] usable
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000006c460000-0x000000006d85ffff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000006d860000-0x000000008cabefff] usable
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000008cabf000-0x000000008cebefff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000008cebf000-0x000000008cfbefff] ACPI NVS
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000008cfbf000-0x000000008cffefff] ACPI data
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x000000008d000000-0x000000008f9fffff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
Jan 22 08:33:20 piotr-pc kernel: BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
Jan 22 08:33:20 piotr-pc kernel: NX (Execute Disable) protection: active
Jan 22 08:33:20 piotr-pc kernel: random: fast init done
Jan 22 08:33:20 piotr-pc kernel: SMBIOS 2.7 present.

Zawartość lightdm.

#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
# dbus-service = True if LightDM provides a D-Bus service to control it
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (local, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-backend = X backend to use (mir)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
  greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
greeter-session=lightdm-deepin-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
user-session=deepin
#allow-user-switching=true
#allow-guest=true
#guest-session=
session-wrapper=/etc/lightdm/Xsession
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=piotr
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8conf:

[enszur]

Laptop to Lenovo y510p- karta graficzna zintegrowana jak i Gf GT 755m. Ogólnie to ściągałem manjaro z oficjalnej strony i nic tam nie ruszalem zr środowiskiem graficznym. Pokazuje mi; desktop – gnome 3.28.2 dm: gdm, lightdm, distro : manjaro 17.1.10.
Ad4. Otworzyłem te logi ale nic w nich nie ma żadnego error.
Ad5. Po wpisaniu pacman -Qs greeter nic się nie pokazuje
Zainstalowałem synaptic bo libinput mi też nie działa

[enszur]

Znalazło Windowsa ;) no nic, teraz jakoś muszę ogarnąć ten dziwny blue screen ale to nie tutaj ;)
Tak BTW. pełno mam plików kalendarz gnome, deepin itp. I panel dotykowy mi nie działa pomimo instalacji synaptic jak to wszystko porządnie ogarnąć?;)
Edit :
Przy odpalaniu wyskakuje mi kvm disabled by bios

[enszur]

Udało się mi zainstalować gdm. Mam zainstalowany os-prober. W grubie mi nie pokazuje. Wybacz ale pisze z telefonu.

[enszur]

Przy instalacji MDM:
– poprzez sudo pacman -S mdm wyskakuje pakiet nie został znaleziony
– sudo systemctl enable mdm.service -f Failed to enable unit: unit file mdm.service doesn't exist
Ale Przy instalacji gdm zatrzymałem proces bo jednego pliku mi nie ściągnęło. Chciałem usunąć /var/lib /pacman/db.lck ale wyskakuje mi, że brak dostępu.
Na domiar złego w biosie zniknął mi Windows i mogę wybrać z listy manjaro, zaawansowane ustawienia i test memory.

[Autor]

Posty